ASN Wikibase Occurrence # 296277
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 13 January 2003 |
Time: | 16:00 LT |
Type: | Piper PA-38-112 |
Owner/operator: | Friedrich |
Registration: | N2400K |
MSN: | 38-79A0617 |
Year of manufacture: | 1979 |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Mansfield, Missouri -
United States of America
|
Phase: | Unknown |
Nature: | Private |
Departure airport: | Mountain View Airport, MO (KMNF) |
Destination airport: | Mansfield, MO (03B) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The airplane contacted a tree during an off airport forced landing. The pilot reported that she flew to 03B to practice a couple of takeoffs and landings. She stated she entered the traffic pattern and pulled the power back when she was 180 degrees from the end of the runway. When she made the base leg turn, she realized that the wind was pushing her away from the runway so she added power, but there was no response from the engine. The pilot stated she tried adding a little more power, but again there was no response. She stated she then pulled the throttle back and advanced it to the full power setting, but there was still no response from the engine. The pilot stated she chose a two-lane dirt lane on wooded farmland on which to land. The left wing contacted a tree during the landing roll and the airplane spun around 180 degrees before coming to rest. Following the accident, the engine was started and it operated normally. The temperature and dewpoint reported 41 nautical miles northwest of the accident site, were 1 degree Celsius and -1 degree Celsius, respectively. These conditions are conducive for serious icing at any power setting. The Lycoming O-235-C Series engine manual, page 3-7, states, "(3) Landing Approach - In making an approach for a landing, carburetor air heat should generally be in the "Full Cold" position. However, if icing conditions are suspected, the "Full Heat" should be applied. In the case that full power need be applied under these conditions, as for an aborted landing, the carburetor heat should be returned to "Full Cold" after power application. See aircraft flight manual for specific instructions." The PA-38-112, Pilot Operating Handbook, pages 4-21and 22, state, "Carburetor heat should not be applied unless there is an indication of carburetor icing, since the use of carburetor heat causes a reduction in power which may be critical in case of a go-around. Full throttle operation with carburetor heat on can cause detonation."
Probable Cause: The pilot's failure to use carburetor heat, which resulted in the formation of carburetor ice and the loss of engine power.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | |
Status: | Investigation completed |
Duration: | 5 months |
Download report: | Final report |
|
Sources:
NTSB CHI03LA051
Revision history:
Date/time | Contributor | Updates |
13-Oct-2022 18:40 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation