ASN Wikibase Occurrence # 297667
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 13 January 2002 |
Time: | 14:37 LT |
Type: | Piper PA-24-250 |
Owner/operator: | |
Registration: | N328EJ |
MSN: | 24-2356 |
Year of manufacture: | 1960 |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Oceano, California -
United States of America
|
Phase: | Unknown |
Nature: | Private |
Departure airport: | Oceano, CA (L52) |
Destination airport: | |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The airplane lost engine power in the traffic pattern and collided with an airport perimeter fence when it landed short of the runway. The pilot reported that while on the downwind leg of the traffic pattern, he lowered the landing gear. He heard a loud bang from the firewall area, and the instrument panel caved in. The engine lost power, and he maneuvered the airplane towards the airport. The airplane touched down about 500 to 1,000 feet short of the runway, and collided with an airport perimeter fence. A post accident examination of the airplane revealed that the mixture control cable separated at the mixture control arm. The engine control bracket, part number 21189-00, was missing. Without the bracket, the mixture control cable hangs freely down below the engine, where the nose gear is located when in the retracted position. A kink in the mixture cable indicated that it became caught on a Zerk fitting located on the pivot point of the nose landing gear when the nose gear was extended to the down position. This resulted in the mixture control cable separating from the mixture control arm on the carburetor. Maintenance records revealed that the airplane was about 2 months overdue for an annual inspection.
Probable Cause: A loss of engine power due to the separation of the mixture control cable from the mixture control arm of the carburetor. The mixture cable separation was due to maintenance personnel's failure to secure the mixture control cable away from the nose landing gear, which resulted in the cable snagging during gear extension. A factor in the accident was the airplane being overdue for an annual inspection.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | |
Status: | Investigation completed |
Duration: | 2 years and 8 months |
Download report: | Final report |
|
Sources:
NTSB LAX02LA065
Revision history:
Date/time | Contributor | Updates |
15-Oct-2022 07:03 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation