ASN Wikibase Occurrence # 299404
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Tuesday 4 January 2000 |
Time: | 14:00 LT |
Type: | RotorWay Exec 90 |
Owner/operator: | Cobb International |
Registration: | N89678 |
MSN: | RI5026 |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | CHANDLER, Arizona -
United States of America
|
Phase: | Unknown |
Nature: | Training |
Departure airport: | CHANDLER, AZ (P19) |
Destination airport: | |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The flight was a familiarization for the private pilot, who was transitioning into this model of helicopter. An approach was being made to runway 03 when the instructor heard a loud bang from the engine compartment behind his back at an altitude of 100 feet. He stated that it felt like all engine power was lost. When the instructor saw the rotor rpm decreasing, he took control and initiated an autorotation to a soft sandy area. During the touchdown, the main rotor blades contacted the tail boom, and the tail rotor blades contacted the ground. The operator reported that a subsequent inspection determined that the secondary drive shaft fractured. Laboratory examination concluded that the shaft failed from fatigue, originating from galling sites introduced during the manufacturing process. The operator reported that a temperature strip on the bearing was noted to be darkened before the flight, but they were unsure if this information was determined independantly by either the CFI or the student. All other shafts in the operator's fleet were inspected and no additional suspect shafts were found.
Probable Cause: the fatigue fracture and separation of the secondary drive shaft, which resulted from the manufacturer's inadequate quality control process.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | |
Status: | Investigation completed |
Duration: | 3 years and 10 months |
Download report: | Final report |
|
Sources:
NTSB LAX00LA071
Revision history:
Date/time | Contributor | Updates |
16-Oct-2022 06:16 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation