ASN Wikibase Occurrence # 55956
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Wednesday 24 December 2008 |
Time: | 07:00 LT |
Type: | Boeing 737-890 |
Owner/operator: | Alaska Airlines |
Registration: | N516AS |
MSN: | 39044/2751 |
Year of manufacture: | 2008 |
Engine model: | CFM 56-7B27/3 |
Fatalities: | Fatalities: 0 / Occupants: 141 |
Aircraft damage: | None |
Category: | Serious incident |
Location: | Seattle/Tacoma International Airport, WA (SEA/KSEA) -
United States of America
|
Phase: | Pushback / towing |
Nature: | Passenger - Scheduled |
Departure airport: | Seattle/Tacoma International Airport, WA (SEA/KSEA) |
Destination airport: | Hollywood Burbank Airport, CA (BUR/KBUR) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:Airline personnel reported that the airplane pushed back from the gate with the auxiliary power unit running. As the push back sequence was completed, two deicing vehicles began deicing operations prior to the flight crew configuring the airplane for deicing. Shortly after, the cabin and flight crew noticed fumes within the cabin and cockpit area. The flight crew instructed the deice crew to discontinue deicing operations and the flight crew performed the smoke removal checklist as the deicing operation stopped. The flight crew started both engines and taxied back to gate N14 where the passengers and flight crew exited the airplane via the jet way. The captain reported that he did not clear the ground deicing crew to start their deicing operations. The driver of the primary deicing vehicle reported that he informed the flight crew of the fluid types, freeze points, and concentrations. He added that there was a lot of "radio chatter" and the bucket operator began deicing operations "after we received no objections" from the flight crew. Company deicing procedures state, in part, "prior to fluid application, Ground Deicing Crew member shall confirm with Flight Crew that the aircraft is configured for deicing." The flight crew gate deicing checklist states that the APU and engine bleed air switches are to be turned off prior to deicing. At the time, the APU and engine bleed air switches were still in the ON position when deicing fluid was sprayed on the airplane. This allowed the fluid to be introduced into the air supply lines leading to the cabin and cockpit.
Probable Cause: The failure of the deicing crew to follow company procedures by not receiving confirmation from the flight crew before beginning to deice the airplane.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | WPR09IA065 |
Status: | Investigation completed |
Duration: | 11 months |
Download report: | Final report |
|
Sources:
NTSB WPR09IA065
FAA register: 2. FAA:
http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?omni=Home-N-Number&nNumberTxt=516AS
History of this aircraft
Other occurrences involving this aircraft
20 August 2023 |
N516AS |
Alaska Airlines |
0 |
Santa Ana-John Wayne International Airport (SNA/KSNA), Santa Ana, CA |
|
sub |
Gear collapse |
Location
Revision history:
Date/time | Contributor | Updates |
27-Dec-2008 23:55 |
FISA |
Added |
20-Jul-2016 15:16 |
Dr.John Smith |
Updated [Registration, Cn, Location, Departure airport, Destination airport, Source, Damage] |
21-Dec-2016 19:25 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation