ASN Wikibase Occurrence # 83421
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 1 January 1999 |
Time: | 15:00 |
Type: | Max Holste MH.1521M Broussard |
Owner/operator: | private |
Registration: | N4022 |
MSN: | 26 |
Total airframe hrs: | 1440 hours |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Minden, NV -
United States of America
|
Phase: | Take off |
Nature: | Private |
Departure airport: | Carson City, NV (CXP) |
Destination airport: | |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:Routine air work was performed and then touch-and-go landing practice was planned. The approach and landing on runway 34 was normal. Trim was reset for takeoff, the checklist was completed, and power was added. During the takeoff roll the pilot noticed that unusual stick forces were required to raise the tail wheel. The trim setting was rechecked and confirmed. The pilot added some additional nose down trim, but no relief of stick pressure was noticed. He decided to abort the takeoff and applied forward stick to prevent the airplane from leaping off the runway in a stalled condition. He was drifting to the right and approaching the intersection of runway 30 at this time. He saw a row of sailplanes parked on runway 30 in his path and elected to turn off the runway into sagebrush and grass. The right main landing gear fell into a ditch and collapsed, buckling and distorting the fuselage. FAA inspectors examined the airplane and did not report finding any trim or control system irregularity; however, the fuselage distortion precluded a complete examination.
Probable Cause: The pilot's failure to maintain proper runway alignment during a rejected takeoff. A factor in the accident was the undetermined pitch control/trim system problem, which led to the pilot's rejected takeoff decision and may have distracted him during attempts to maintain aircraft control.
Sources:
https://www.ntsb.gov/Pages/monthly.aspx (Note: ex 022/cn26)
Revision history:
Date/time | Contributor | Updates |
18-Dec-2010 15:47 |
TB |
Added |
21-Dec-2016 19:25 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
25-Nov-2017 12:48 |
ASN Update Bot |
Updated [Cn, Operator, Nature, Departure airport, Destination airport, Source, Narrative] |
14-Dec-2017 16:55 |
ASN Update Bot |
Updated [Cn, Operator, Departure airport, Destination airport, Narrative] |
28-May-2023 13:21 |
TB |
Updated [[Cn, Operator, Departure airport, Destination airport, Narrative]] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation